how to reset the oil life indicator in GMC Sierra T1XX (2019-Present)?

GMC Sierra T1XX (2019-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the oil life indicator in GMC Sierra T1XX (2019-Present) after an oil change. Step-by-step guide for accurate oil life tracking.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in a safe environment while performing the reset.

Symptoms

•Oil life percentage not updating
•Oil change reminder notification displayed
•Check engine light may illuminate (if oil life isn't reset)

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' or 'On' position without starting the engine.
2
Access the driver information center using the controls on the steering wheel.
3
Navigate to the 'Settings' menu.
4
Select the 'Vehicle' option.
5
Find and select 'Oil Life Reset' or 'Oil Change Reminder.'
6
Confirm the reset action.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specific required for resetting

Parts Required

•None required for resetting

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' or 'On' position without starting the engine.
2
Access the driver information center using the controls on the steering wheel.
3
Navigate to the 'Settings' menu.
4
Select the 'Vehicle' option.
5
Find and select 'Oil Life Reset' or 'Oil Change Reminder.'
6
Confirm the reset action.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn the ignition to the "Run" position without starting the engine.

2. Access Driver Information Center

Use the buttons on the steering wheel to scroll through the menu.
Locate and select "Settings."
Confirm you are in the correct section for vehicle settings.

3. Reset Oil Life Indicator

Select "Vehicle."
Look for "Oil Life Reset" or "Oil Change Reminder."
Press the button to enter.
Confirm the reset by selecting "Yes" or pressing the appropriate button.
Wait for a confirmation message that the oil life has been reset.