FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on GMC Sierra T1XX (2019-Present) - GMC Sierra
Home/Cars/GMC/Sierra/T1XX (2019-Present)/how to reset the oil change light on GMC Sierra T1XX (2019-Present)

how to reset the oil change light on GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
327 words

Problem Statement

Learn how to reset the oil change light on your GMC Sierra T1XX (2019-Present) with this quick and easy guide. Step-by-step instructions included.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park or neutral with the parking brake engaged while performing the reset

Symptoms

  • •Oil change light illuminated on the dashboard
  • •Message indicating 'Oil Change Due' on the driver information center
  • •Vehicle may not exhibit any performance symptoms unless routine maintenance is ignored

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specific tools are required for this reset.

Parts Required

  • •No parts are required for resetting the oil change light.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this reset.
  • Ensure the vehicle is parked on a level surface.
  • Turn the ignition to the "Run" position without starting the engine.
2. Perform the Reset
  1. Press the Gas Pedal:
    • Fully press the accelerator pedal three times within five seconds.
  2. Observe the Dashboard:
    • Look for a blinking or extinguishing of the oil change light.
  3. Start the Engine:
    • Turn the key to start the engine and check that the oil change light is off.