how to reset the dashboard warning lights on GMC Sierra T1XX (2019-Present)?

GMC Sierra T1XX (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

385 words

Problem Statement

Learn how to reset dashboard warning lights on GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe environment while performing these steps, especially during any OBD-II scanning.

Symptoms

•Dashboard warning lights illuminated
•Check engine light remains on after repair
•Maintenance reminders still displayed
•Other warning indicators persist after corrective action

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the accelerator pedal three times within five seconds.
3
Observe the dashboard for any indicator lights that may flash or turn off.
4
Turn the ignition key to the 'Off' position and then back to 'On' again.
5
Start the engine to verify that the warning lights have reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (optional)

Parts Required

•None specifically required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the accelerator pedal three times within five seconds.
3
Observe the dashboard for any indicator lights that may flash or turn off.
4
Turn the ignition key to the 'Off' position and then back to 'On' again.
5
Start the engine to verify that the warning lights have reset.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if applicable).
Ensure the vehicle is parked on a level surface and the parking brake is engaged.

2. Ignition Position

Turn the ignition key to the "On" position without starting the engine.
Ensure all accessories are turned off for clarity.

3. Reset Procedure

Quickly press the accelerator pedal three times within five seconds.
Observe the dashboard; some lights may blink or turn off, indicating a reset attempt.

4. Final Check

Turn the ignition key to the "Off" position and then back to "On."
Start the engine to confirm that all previously illuminated warning lights are now off.

5. Use OBD-II Scanner (if needed)

If warning lights remain on, connect an OBD-II scanner to the vehicle's diagnostic port.
Follow the scanner instructions to clear any diagnostic trouble codes (DTCs).