how to reset the check engine light on my GMC Sierra T1XX (2019-Present)?

GMC Sierra T1XX (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

424 words

Problem Statement

Learn how to reset the check engine light on your GMC Sierra T1XX (2019-Present) with this step-by-step guide. Ensure your vehicle runs smoothly.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park with the engine off before connecting the scanner

Symptoms

•Check engine light illuminated
•Potential error codes stored in the vehicle's computer
•Engine performance issues (if related to the cause of the light)
•Possible pending codes that may require attention

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Address underlying issues before resetting the light
3
Clear codes using the OBD-II scanner

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None specifically required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect any accessories that might interfere with the scan (e.g., phone chargers).

2. Connect OBD-II Scanner

Locate the OBD-II port, typically found under the dashboard near the steering column.
Plug the OBD-II scanner into the port.

3. Power On the Scanner

Turn the vehicle ignition to the "On" position (do not start the engine).
Follow the scanner's instructions to power it on and establish a connection with the vehicle.

4. Retrieve Error Codes

Navigate through the scanner menu to select "Read Codes" or similar options.
Record any error codes that appear for future reference.

5. Clear the Codes

Navigate to the "Erase Codes" or "Clear Codes" option on the scanner.
Confirm the command to clear the stored error codes.
Wait for the scanner to confirm that the codes have been successfully erased.

6. Disconnect Scanner

Safely disconnect the OBD-II scanner from the port.
Turn off the vehicle ignition.