how to reset check engine light on GMC Sierra T1XX (2019-Present) after fixing?

GMC Sierra T1XX (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

429 words

Problem Statement

Learn how to reset the check engine light on GMC Sierra T1XX (2019-Present) after repairs. Step-by-step guide with diagnostic steps and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure that the vehicle is in park or neutral, and the parking brake is engaged before working with the ignition.

Symptoms

•Check engine light illuminated
•No noticeable performance issues
•Engine runs smoothly after repairs
•Recent repairs or maintenance performed

Diagnostic Steps

1
Verify that all repairs related to the check engine light have been completed.
2
Use an OBD-II scanner to check for any remaining trouble codes.
3
Ensure that the vehicle's battery is in good condition and fully charged.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Parts Required

•None (since this is a reset procedure)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner, vehicle owner's manual
Ensure the vehicle is parked in a safe area and the engine is off.

2. Connect the OBD-II Scanner

Locate the OBD-II port, typically found under the dashboard near the steering column.
Plug the OBD-II scanner into the port.

3. Turn on the Ignition

Turn the ignition key to the "ON" position without starting the engine or press the "Start" button without pressing the brake pedal (for push-start vehicles).

Follow the prompts on the OBD-II scanner to access the vehicle's diagnostic menu.
Select "Read Codes" to ensure there are no active trouble codes present.

5. Clear the Codes

Navigate to the option that says "Erase Codes" or "Clear Codes."
Confirm the action when prompted by the scanner.
Wait for the scanner to indicate that the codes have been successfully cleared.

6. Disconnect the Scanner

Safely remove the OBD-II scanner from the port.
Turn off the ignition.

7. Start the Engine

Start the engine and let it run for a few moments to ensure the check engine light remains off.