how to reset check engine light on GMC Sierra T1XX (2019-Present)?

GMC Sierra T1XX (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

376 words

Problem Statement

Learn how to reset the check engine light on GMC Sierra T1XX (2019-Present) with this step-by-step guide. Ensure your vehicle runs smoothly.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the parking brake is engaged before starting the procedure.

Symptoms

•Check engine light illuminated on the dashboard
•Vehicle may exhibit no noticeable symptoms if the underlying issue is resolved
•Potentially stored error codes in the vehicle's computer

Diagnostic Steps

1
Use an OBD-II scanner to check for any stored error codes.
2
Address any underlying mechanical issues indicated by the error codes.
3
Confirm that all repairs are complete and the issues are resolved before resetting the light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None (if the underlying issue is already resolved)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the engine is turned off.
Gather necessary tools and prepare the OBD-II scanner.

2. Connect OBD-II Scanner

Locate the OBD-II port, typically found under the dashboard near the driver's side.
Plug the OBD-II scanner into the port and turn the ignition to the "On" position without starting the engine.

3. Reset Check Engine Light

Follow the prompts on the OBD-II scanner to select the option for reading and clearing codes.
Select "Clear Codes" or "Reset Check Engine Light" as per the scanner's instructions.
Wait for the scanner to confirm that the codes have been cleared.

4. Disconnect Scanner

Safely disconnect the OBD-II scanner from the port.
Turn off the ignition.

5. Test Drive

Start the vehicle and take it for a short test drive to ensure the check engine light remains off.