how to reprogram the key fob for GMC Sierra T1XX (2019-Present)?

GMC Sierra T1XX (2019-Present)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

472 words

Problem Statement

Learn how to reprogram the key fob for GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic steps and programming instructions.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before attempting key fob programming.
•Avoid turning the ignition to the 'On' position with the engine running during programming.

Symptoms

•Key fob not unlocking or locking the vehicle
•Ignition does not respond to key fob
•Key fob buttons not functioning
•Check if the key fob battery is dead

Diagnostic Steps

1
Verify the key fob battery is functional by testing with a multimeter or replacing it.
2
Check for any visible damage on the key fob casing or buttons.
3
Confirm that the vehicle is in the vicinity of the key fob, as range issues can affect functionality.
4
Ensure that all previous key fobs have been removed from the vehicle's memory if applicable.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Small flathead screwdriver

Parts Required

•Key fob battery (CR2032 or as specified in the key fob manual)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify the key fob battery is functional by testing with a multimeter or replacing it.
2
Check for any visible damage on the key fob casing or buttons.
3
Confirm that the vehicle is in the vicinity of the key fob, as range issues can affect functionality.
4
Ensure that all previous key fobs have been removed from the vehicle's memory if applicable.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if required), a second working key fob (if available).
Ensure the vehicle is in park and the engine is off.
Have replacement batteries available for the key fob if needed.

2. Enter Programming Mode

Insert the key into the ignition and turn it to the "On" position without starting the engine.
Press the brake pedal and turn the ignition to the "Off" position.
Repeat this process (turning to "On" and "Off") three times, ending with the ignition in the "On" position.
Wait for the security indicator light to stop flashing, indicating the vehicle is in programming mode.

3. Program the Key Fob

Press and hold the "Lock" and "Unlock" buttons on the key fob simultaneously for approximately 14 seconds.
Release both buttons and then press the "Lock" button again. The locks should cycle to indicate successful programming.
If programming multiple key fobs, repeat this process for each additional fob.

4. Exit Programming Mode

Turn the ignition to the "Off" position to exit programming mode.
Test the newly programmed key fob to ensure all functions are working correctly.