how to fix transmission jerking in my GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

505 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Jerking or bucking during acceleration
•Delayed or harsh shifting between gears
•Check engine light illuminated
•Unusual noises from the transmission (grinding or clunking)
•Poor acceleration performance
•Fluid leaks under the vehicle

Diagnostic Steps

1
Scan the vehicle’s computer system for any diagnostic trouble codes (DTCs) using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission filter for blockages or damage.
4
Examine wiring and connectors related to the transmission control module (TCM).
5
Test the transmission control module for proper function using a multimeter.
6
Check for any noticeable leaks at the transmission pan or seals.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Transmission fluid pump

Parts Required

•Transmission fluid (Dexron VI)
•Transmission filter
•Gasket for transmission pan (if applicable)
•Transmission control module (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s computer system for any diagnostic trouble codes (DTCs) using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission filter for blockages or damage.
4
Examine wiring and connectors related to the transmission control module (TCM).
5
Test the transmission control module for proper function using a multimeter.
6
Check for any noticeable leaks at the transmission pan or seals.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the battery to ensure safety while working on the electrical components.
Raise the vehicle securely using jack stands.

2. Check and Change Transmission Fluid

Sub-steps:
1. Remove the transmission fluid dipstick and check fluid level with the engine running.
2. If low, drain the old fluid by removing the transmission drain plug or pan.
3. Replace the transmission filter by removing the transmission pan (if applicable).
4. Clean the transmission pan and magnet, then reinstall the new filter.
5. Refill the transmission with the recommended type and amount of fluid (typically Dexron VI for GMC).

3. Inspect and Repair Wiring

Sub-steps:
1. Visually inspect all wiring and connectors leading to the TCM for signs of wear or corrosion.
2. Use a multimeter to test for continuity in the wiring harness.
3. Repair or replace any damaged connectors or wiring as necessary.

4. Replace Transmission Control Module (if necessary)

Sub-steps:
1. Locate the TCM (usually found near the transmission or behind the glove box).
2. Disconnect the wiring harness from the TCM.
3. Unbolt and remove the old TCM.
4. Install the new TCM and reconnect the wiring harness.
5. Reconnect the battery.