how to fix power windows not working on GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

539 words

Problem Statement

Learn how to diagnose and fix power windows not working on GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent short circuits or shocks.

Symptoms

•Power window switches are unresponsive.
•Windows do not move when switches are pressed.
•Clicking or grinding noise when switches are activated.
•Window lock feature is engaged, preventing operation.
•Possible blown fuses related to power windows.

Diagnostic Steps

1
Check the window lock button to ensure it is not engaged.
2
Inspect the fuses related to the power window system using the vehicle’s manual for the specific fuse location.
3
Use an OBD-II scanner to check for any related error codes that may indicate electrical issues.
4
Visually inspect the wiring harnesses and connectors at the door for any signs of damage or corrosion.
5
Test the power window switch for continuity using a multimeter.
6
Check the window motor for proper operation by directly applying power to it.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set
•Electrical contact cleaner

Parts Required

•Power window fuse
•Window switch (if faulty)
•Window motor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the window lock button to ensure it is not engaged.
2
Inspect the fuses related to the power window system using the vehicle’s manual for the specific fuse location.
3
Use an OBD-II scanner to check for any related error codes that may indicate electrical issues.
4
Visually inspect the wiring harnesses and connectors at the door for any signs of damage or corrosion.
5
Test the power window switch for continuity using a multimeter.
6
Check the window motor for proper operation by directly applying power to it.

Solution

1. Preparation

Gather tools: OBD-II scanner, multimeter, socket set, screwdriver set, and electrical contact cleaner.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Check and Replace Fuses

Locate the fuse box using the vehicle’s manual.
Remove the power window fuse using a fuse puller.
Inspect the fuse for any signs of damage; replace it if blown. Use a fuse with the same amperage rating.
Reconnect the battery and test the power windows.

3. Inspect and Repair Wiring

Remove the door panel using a screwdriver to access the wiring harness.
Check for any frayed or damaged wires in the harness.
Repair any damaged wires using solder and heat-shrink tubing or replace the wiring harness if necessary.
Clean connectors with electrical contact cleaner and ensure a secure connection.

4. Test and Replace Window Switch

Use a multimeter to test the continuity of the window switch.
If the switch is faulty, remove it by unscrewing and disconnecting the wiring harness.
Replace with a new switch by connecting the wiring harness and securing it in place.

5. Test and Replace Window Motor

If the switch is functional, check the window motor by applying direct power from a battery.
If the motor does not operate, remove it from the door assembly.
Replace with a new window motor if it fails to operate under direct power.