how to fix GMC Sierra T1XX (2019-Present) warning lights on the dashboard?

GMC Sierra T1XX (2019-Present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

505 words

Problem Statement

Learn how to diagnose and fix warning lights on the dashboard of GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting or servicing components.

Symptoms

•Check engine light illuminated
•ABS warning light activated
•Traction control light on
•Service engine soon light appears
•Battery/charging system warning light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check the vehicle’s battery voltage and connections for any signs of corrosion or looseness.
3
Inspect the brake fluid level and condition; ensure there are no leaks in the brake system.
4
Examine the vehicle's fuses, especially those related to the dashboard warning systems.
5
Verify the health of the alternator and charging system using a multimeter.
6
Review the vehicle's maintenance history for any recent repairs or services that could relate to the warning lights.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers
•Torque wrench

Parts Required

•Replacement sensors (if necessary)
•Battery (if necessary)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check the vehicle’s battery voltage and connections for any signs of corrosion or looseness.
3
Inspect the brake fluid level and condition; ensure there are no leaks in the brake system.
4
Examine the vehicle's fuses, especially those related to the dashboard warning systems.
5
Verify the health of the alternator and charging system using a multimeter.
6
Review the vehicle's maintenance history for any recent repairs or services that could relate to the warning lights.

Solution

1. Preparation

Gather tools and materials.
Ensure the vehicle is parked on a level surface with the engine off and the keys removed.
Disconnect the negative battery terminal to prevent electric shock.

2. Scan for Codes

Reconnect the OBD-II scanner to the vehicle's diagnostic port.
Turn the ignition to the "On" position without starting the engine.
Retrieve and document any trouble codes displayed.

3. Address Identified Issues

For Check Engine Light:
- Based on the codes, replace faulty components as necessary (e.g., oxygen sensors, mass airflow sensor).
- Clear the codes using the OBD-II scanner and check if the light returns.
For ABS and Traction Control Lights:
- Inspect and replace any faulty wheel speed sensors.
- Check the ABS module for proper function and wiring integrity.
For Battery/Charging Light:
- Test the battery with a multimeter (should read 12.6 volts or higher when fully charged).
- Replace the battery if it’s below this threshold.
- If the battery is good, proceed to test the alternator output (should read between 13.8 to 14.4 volts with the engine running). Replace if faulty.

4. Reassemble and Test

Reconnect the negative battery terminal.
Start the vehicle and observe if the warning lights are still illuminated.
Conduct a short test drive to monitor for any recurring lights.