how to fix GMC Sierra T1XX (2019-Present) parking sensors not working

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

509 words

Problem Statement

Learn how to diagnose and fix parking sensors not working on GMC Sierra T1XX (2019-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before starting any electrical work.
•Allow the vehicle to cool down if it has been recently driven before inspecting electrical components.

Symptoms

•No audible beep when reversing
•Parking sensor warning light illuminated on the dashboard
•Inaccurate distance readings displayed on the infotainment screen
•Sensors appear dirty or obstructed
•Lack of response when objects are detected nearby

Diagnostic Steps

1
Inspect the parking sensors for physical damage or obstruction from dirt and debris.
2
Use an OBD-II scanner to check for any error codes related to the parking sensor system.
3
Verify the wiring and connectors for the parking sensors for any signs of wear, corrosion, or disconnection.
4
Test the parking sensor activation by engaging reverse gear and listening for any sounds from the sensors.
5
Check the vehicle's fuse box for any blown fuses related to the parking assist system.
6
Perform a system reset by disconnecting the vehicle's battery for a few minutes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Cleaning supplies (cloth, water, mild detergent)

Parts Required

•Replacement parking sensors (if damaged)
•Replacement fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the parking sensors for physical damage or obstruction from dirt and debris.
2
Use an OBD-II scanner to check for any error codes related to the parking sensor system.
3
Verify the wiring and connectors for the parking sensors for any signs of wear, corrosion, or disconnection.
4
Test the parking sensor activation by engaging reverse gear and listening for any sounds from the sensors.
5
Check the vehicle's fuse box for any blown fuses related to the parking assist system.
6
Perform a system reset by disconnecting the vehicle's battery for a few minutes.

Solution

1. Preparation

Gather necessary tools and parts.
Tools Required: OBD-II scanner, multimeter, socket set, cleaning supplies (cloth, water, mild detergent).
Safety Warnings: Disconnect the battery before starting any electrical work.

2. Inspect and Clean Sensors

Locate the parking sensors on the rear bumper.
Use cleaning supplies to gently wash each sensor to remove dirt or debris.
Inspect each sensor visually for cracks or physical damage. Replace any damaged sensors.

3. Check Wiring and Connectors

Remove the rear bumper if necessary to access the wiring harness.
Inspect wiring for frays or breaks and check that connectors are securely attached.
Use a multimeter to test for continuity in the wiring. Repair or replace any damaged wires as needed.

4. Replace Blown Fuses

Locate the fuse box according to the owner’s manual.
Check fuses related to the parking sensor system; replace any that are blown with the correct amperage.

5. Reconnect Battery and Test

Reconnect the vehicle’s battery.
Start the vehicle and engage reverse gear to test the parking sensors.
Listen for the audible alert and observe the dashboard for any error messages.