how to diagnose C0035 error code on my GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

Error Code: C0035

3 min read

572 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0035 error code related to wheel speed sensor on GMC Sierra T1XX. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C0035

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the brakes to cool before inspecting to avoid burns.

Symptoms

•Check engine light illuminated
•ABS warning light activated
•Erratic or inconsistent speedometer readings
•Reduced braking performance
•Vehicle traction control system disabled

Diagnostic Steps

1
Scan the vehicle’s OBD-II system using a compatible scanner to confirm the C0035 code.
2
Inspect the wheel speed sensor wiring and connectors for any visible damage or corrosion.
3
Measure the resistance of the wheel speed sensor using a multimeter to check if it falls within the manufacturer’s specified range.
4
Check for any related codes that may indicate additional issues with the ABS or traction control systems.
5
Perform a visual inspection of the brake system components for any signs of wear or malfunction.
6
Test drive the vehicle while monitoring the wheel speed sensor data with a scan tool to ensure proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Jack and jack stands

Parts Required

•Wheel speed sensor (specific to GMC Sierra T1XX)
•Electrical connector cleaner (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s OBD-II system using a compatible scanner to confirm the C0035 code.
2
Inspect the wheel speed sensor wiring and connectors for any visible damage or corrosion.
3
Measure the resistance of the wheel speed sensor using a multimeter to check if it falls within the manufacturer’s specified range.
4
Check for any related codes that may indicate additional issues with the ABS or traction control systems.
5
Perform a visual inspection of the brake system components for any signs of wear or malfunction.
6
Test drive the vehicle while monitoring the wheel speed sensor data with a scan tool to ensure proper operation.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and secure it with wheel chocks.
Disconnect the battery to prevent electrical shorts.

2. Inspect and Replace Wheel Speed Sensor

Remove the wheel:
- Use a jack to lift the vehicle and secure it on jack stands.
- Remove the lug nuts using a socket set and take off the wheel.
Access the wheel speed sensor:
- Locate the wheel speed sensor, usually mounted on the wheel hub or brake assembly.
Disconnect the sensor:
- Carefully unplug the sensor connector, ensuring no damage to the wiring.
Remove the sensor:
- Unscrew the sensor from its mounting location using a wrench.
Install the new sensor:
- Position the new wheel speed sensor in place and tighten it to the manufacturer's torque specifications (usually around 15-20 ft-lbs).
Reconnect the sensor:
- Plug the sensor connector back into its socket securely.

3. Reassembly and Testing

Reattach the wheel:
- Place the wheel back onto the hub and hand-tighten the lug nuts.
Lower the vehicle:
- Remove the jack stands and lower the vehicle to the ground.
Tighten the lug nuts:
- Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications (typically 75-100 ft-lbs).
Reconnect the battery:
- Reconnect the negative battery terminal.
Clear the error codes:
- Use the OBD-II scanner to clear the C0035 code and any other stored codes.