GMC Sierra T1XX (2019-Present) dashboard warning lights meaning

GMC Sierra T1XX (2019-Present)

Error Codes

1-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

597 words

Problem Statement

Learn how to diagnose and resolve dashboard warning lights on GMC Sierra T1XX (2019-Present). Step-by-step guide with tools and tips included.

Affected Component

Electrical

Estimated Time

1-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow engine to cool before inspecting any components related to the cooling system.

Symptoms

•Illuminated check engine light
•ABS warning light activated
•Oil pressure warning light displayed
•Battery/charging system warning light on
•Tire pressure monitoring system (TPMS) light lit
•Traction control warning light engaged

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check the vehicle's fluid levels (oil, coolant, brake fluid).
3
Inspect the battery and charging system visually for corrosion or damage.
4
Verify tire pressures using a tire pressure gauge.
5
Examine brake fluid level and condition to check for ABS issues.
6
Inspect the vehicle's traction control system for faults or malfunctions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•Multimeter
•Basic socket set
•Brake fluid

Parts Required

•Brake fluid (if needed)
•TPMS sensors (if needed)
•Battery or alternator (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check the vehicle's fluid levels (oil, coolant, brake fluid).
3
Inspect the battery and charging system visually for corrosion or damage.
4
Verify tire pressures using a tire pressure gauge.
5
Examine brake fluid level and condition to check for ABS issues.
6
Inspect the vehicle's traction control system for faults or malfunctions.

Solution

1. Preparation

Gather necessary tools and safety equipment.
Ensure the vehicle is parked on a level surface and the engine is turned off.
Disconnect the battery before working on electrical systems.

2. Addressing the Check Engine Light

Sub-steps:
1. Connect the OBD-II scanner to the vehicle’s diagnostic port.
2. Record any error codes and consult the manufacturer’s service manual for specific diagnostics.
3. Clear the error codes and take the vehicle for a test drive to see if the light returns.
4. If the code returns, proceed with repair based on the specific code's description.

3. Resolving ABS Warning Light

Sub-steps:
1. Inspect the brake fluid reservoir; fill with the manufacturer-recommended brake fluid if low.
2. Check ABS sensors at each wheel for damage or disconnection.
3. If sensors are intact, use the OBD-II scanner to check for fault codes related to the ABS system.
4. Repair or replace any faulty sensors as indicated by the diagnostic codes.

4. Fixing Battery/Charging System Warning Light

Sub-steps:
1. Inspect the battery terminals for corrosion and clean them if necessary.
2. Test the battery voltage using a multimeter; it should read around 12.6 volts.
3. Start the engine and check the voltage again; it should be between 13.7 to 14.7 volts.
4. If the voltage is out of range, replace the alternator or battery as needed.

5. Resolving Tire Pressure Monitoring System (TPMS) Light

Sub-steps:
1. Check each tire’s pressure using a tire pressure gauge; inflate to the recommended PSI.
2. If tire pressures are correct, use the OBD-II scanner to check for TPMS fault codes.
3. If a specific sensor is faulty, replace the TPMS sensor in the affected tire.