FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my Genesis G70 traction control light on - Genesis G70
Home/Cars/Genesis/G70/IG (2017-2023)/why is my Genesis G70 traction control light on

why is my Genesis G70 traction control light on

Genesis G70 IG (2017-2023)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
521 words

Problem Statement

Learn how to diagnose and fix the traction control light issue on your Genesis G70. Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component
Brakes
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Ensure the vehicle is securely lifted and supported before performing any work on the wheels

Symptoms

  • •Traction control warning light illuminated on the dashboard
  • •Vehicle may experience reduced acceleration
  • •Unstable handling during acceleration or cornering
  • •Activation of the anti-lock braking system (ABS) light
  • •Possible loss of traction in slippery conditions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Brake fluid (DOT 3 or DOT 4 as specified)

Parts Required

  • •Wheel speed sensors (if faulty)
  • •Traction control switch (if faulty)

Additional Information

Affected Component
Brakes
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to ensure safety while working on electrical components.
2. Inspect Wheel Speed Sensors
  • Sub-steps:
    • Locate the wheel speed sensors at each wheel hub.
    • Visually inspect for dirt, damage, or disconnection.
    • Use a multimeter to check the resistance of each sensor (typically should be around 1,000-2,500 ohms).
  • Tools Required: Multimeter, socket set
  • Safety Warnings: Ensure the vehicle is securely lifted and supported before working on wheels.
3. Check Brake Fluid Level
  • Sub-steps:
    • Locate the brake fluid reservoir under the hood.
    • Check the fluid level against the minimum and maximum marks.
    • If low, top up with the appropriate brake fluid specified in the owner's manual.
  • Tools Required: Brake fluid (DOT 3 or DOT 4 as specified)
4. Inspect ABS Module
  • Sub-steps:
    • Locate the ABS module typically found near the brake master cylinder.
    • Check for any loose or damaged wiring and connectors.
    • Inspect the module for any visible signs of leaks or corrosion.
  • Tools Required: Visual inspection tools, socket set
5. Test Traction Control Switch
  • Sub-steps:
    • Locate the traction control switch, usually on the dashboard.
    • Use a multimeter to test for continuity when the switch is activated.
    • Replace the switch if it does not function properly.
  • Tools Required: Multimeter, socket set