why is my Genesis G70 IG (2017-2023) windshield wipers not working?

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

515 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix windshield wipers not working on Genesis G70 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid short circuits.

Symptoms

•Windshield wipers do not activate when switched on
•No sound from the wiper motor
•Wiper control stalk feels loose or unresponsive
•Wiper blades remain stationary regardless of speed setting
•Washer fluid does not spray when activated

Diagnostic Steps

1
Inspect the wiper control stalk for physical damage or looseness.
2
Check the fuse for the windshield wiper system in the fuse box.
3
Use an OBD-II scanner to check for any error codes related to the wiper system.
4
Test the wiper motor by applying direct power to it.
5
Check the wiring and connectors for any signs of damage or corrosion.
6
Inspect the wiper linkage for any disconnections or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Socket set
•Fuse puller
•Screwdriver set
•Pliers

Parts Required

•Windshield wiper motor (if faulty)
•Wiper linkage assembly (if damaged)
•Replacement fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the wiper control stalk for physical damage or looseness.
2
Check the fuse for the windshield wiper system in the fuse box.
3
Use an OBD-II scanner to check for any error codes related to the wiper system.
4
Test the wiper motor by applying direct power to it.
5
Check the wiring and connectors for any signs of damage or corrosion.
6
Inspect the wiper linkage for any disconnections or damage.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the battery to prevent electrical shock.
Ensure the vehicle is parked on a flat surface and the ignition is off.

2. Inspect and Replace the Fuse

Locate the fuse box, usually found under the dashboard or in the engine compartment.
Remove the fuse related to the windshield wipers using a fuse puller.
Inspect the fuse for continuity; replace it if blown with a new one of the same amperage.
Reinstall the fuse into the fuse box securely.

3. Test the Wiper Motor

Locate the windshield wiper motor, typically situated at the base of the windshield.
Disconnect the wiring harness from the motor.
Using a multimeter, check for voltage at the connectors when the wiper switch is activated.
If there is power, but the motor does not operate, replace the wiper motor.
If there is no power, trace the wiring back to the switch and check for continuity.

4. Inspect the Wiper Linkage

Remove the wiper arms by loosening the retaining nuts and lifting them off the splines.
Inspect the wiper linkage for any broken or disconnected components.
If damaged, replace the linkage assembly.
Reattach the wiper arms securely.

5. Reassemble and Test

Reconnect any wiring harnesses that were disconnected.
Reconnect the battery.
Test the windshield wipers on all settings to ensure proper operation.