why does my Genesis G70 transmission jerk when shifting

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

530 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool down before performing any repairs near the transmission.

Symptoms

•Jerking or harsh shifting between gears
•Slipping out of gear unexpectedly
•Unusual noises during shifting (clunking or grinding)
•Delayed engagement when shifting from park to drive/reverse
•Check engine light illuminated (potentially related to transmission issues)

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related fault codes.
2
Check the transmission fluid level and condition (color, smell, and clarity).
3
Inspect the transmission fluid for contamination or debris.
4
Examine the transmission mount for wear or damage.
5
Test the throttle position sensor (TPS) with a multimeter to ensure proper function.
6
Monitor the vehicle's speed sensor output using a scan tool while driving to check for inaccuracies.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pump
•Fluid catch pan
•Funnel
•Socket set
•Multimeter
•Jack and jack stands
•Screwdriver

Parts Required

•Transmission fluid
•Transmission filter
•Transmission mount
•Throttle position sensor (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related fault codes.
2
Check the transmission fluid level and condition (color, smell, and clarity).
3
Inspect the transmission fluid for contamination or debris.
4
Examine the transmission mount for wear or damage.
5
Test the throttle position sensor (TPS) with a multimeter to ensure proper function.
6
Monitor the vehicle's speed sensor output using a scan tool while driving to check for inaccuracies.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to avoid any electrical shorts during repair.
Gather necessary tools and parts.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, fluid catch pan, funnel, socket set.
Remove the transmission fluid pan using the socket set.
Drain the old transmission fluid into the catch pan.
Inspect the transmission filter for debris; replace it if necessary.
Reinstall the pan with a new gasket and torque to manufacturer specifications.
Fill the transmission with the appropriate type and amount of new fluid using the funnel.

3. Inspect and Replace Transmission Mount

Tools Required: Jack and jack stands, socket set.
Raise the vehicle and secure it on jack stands.
Locate the transmission mount and inspect for cracks or excessive wear.
If damaged, remove the bolts securing the mount and replace it with a new one, torquing to specifications.

4. Test and Adjust Throttle Position Sensor

Tools Required: Multimeter, screwdriver.
Locate the TPS on the throttle body.
Disconnect the electrical connector from the TPS.
Use the multimeter to check the resistance across the terminals while opening and closing the throttle.
If readings are outside of the specified range, replace the TPS and reconnect.