why does my Genesis G70 steering wheel shake at high speeds?

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

467 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix steering wheel shake at high speeds in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses when working with tires and jacks.
•Ensure the vehicle is securely lifted before working underneath it.

Symptoms

•Steering wheel vibration at speeds above 50 mph
•Uneven tire wear
•Vehicle pulling to one side
•Increased road noise
•Loose feeling in the steering wheel

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure in all tires to ensure they are inflated to recommended levels.
3
Perform a visual inspection of suspension components for damage or looseness.
4
Balance all four wheels using a wheel balancer.
5
Check wheel alignment using a professional alignment machine.
6
Test drive the vehicle after each step to assess if the issue persists.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack
•Jack stands
•Tire pressure gauge
•Wheel balancer
•Alignment machine

Parts Required

•Replacement tires (if necessary)
•Wheel weights (for balancing)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure in all tires to ensure they are inflated to recommended levels.
3
Perform a visual inspection of suspension components for damage or looseness.
4
Balance all four wheels using a wheel balancer.
5
Check wheel alignment using a professional alignment machine.
6
Test drive the vehicle after each step to assess if the issue persists.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.

2. Inspect and Replace Tires (if necessary)

Sub-steps:
1. Remove the wheel covers or hubcaps if applicable.
2. Loosen the lug nuts slightly with a lug wrench.
3. Lift the vehicle using a jack and secure it with jack stands.
4. Remove the wheel and inspect the tire for uneven wear or damage.
5. If damage is found, replace the tire with a new one of the same size and type.
Tools Required: Lug wrench, jack, jack stands, tire pressure gauge.

3. Wheel Balancing

Sub-steps:
1. Mount the wheel on a wheel balancer.
2. Follow the balancer’s instructions to identify any imbalance.
3. Add weight as necessary to balance the wheel.
4. Repeat for all four wheels.
Tools Required: Wheel balancer.

4. Wheel Alignment

Sub-steps:
1. Drive the vehicle to an alignment shop or use an alignment machine.
2. Adjust the toe, camber, and caster angles to manufacturer specifications.
3. Test drive the vehicle to confirm alignment is now correct.
Tools Required: Alignment machine.