why does my Genesis G70 IG (2017-2023) transmission jerk when shifting gears

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

526 words

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Genesis G70 (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a level surface and securely supported on jack stands if elevated.
•Always wear gloves and safety glasses.
•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission.

Symptoms

•Jerking or harsh shifting between gears
•Delayed engagement when shifting into drive or reverse
•Unusual noises during shifting (clunking or grinding)
•Warning lights illuminated on the dashboard (e.g., check engine light)
•Decreased fuel efficiency
•Fluid leaks under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burning.
3
Check for any visible leaks around the transmission and associated components.
4
Examine the transmission mounts for wear or damage that could affect shifting.
5
Test drive the vehicle to replicate the issue and observe behavior under various driving conditions.
6
Inspect the throttle position sensor (TPS) and vehicle speed sensor (VSS) for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Transmission fluid
•Funnel
•Torque wrench

Parts Required

•Transmission fluid
•Transmission filter
•Gasket or sealant for transmission pan

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burning.
3
Check for any visible leaks around the transmission and associated components.
4
Examine the transmission mounts for wear or damage that could affect shifting.
5
Test drive the vehicle to replicate the issue and observe behavior under various driving conditions.
6
Inspect the throttle position sensor (TPS) and vehicle speed sensor (VSS) for proper operation.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, transmission fluid, funnel, torque wrench.
Safety Warnings: Ensure the vehicle is on a level surface and securely supported on jack stands if elevated. Always wear gloves and safety glasses.

2. Fluid Change and Filter Replacement

Drain Transmission Fluid:
- Locate the transmission drain plug and remove it using a socket wrench.
- Allow the fluid to completely drain into a suitable container.
Replace Transmission Filter:
- Remove the transmission pan using a socket set. (Note: you may need to remove bolts and carefully pry the pan loose).
- Replace the transmission filter by detaching it from its mounting location.
Install New Filter:
- Install the new filter, ensuring it is seated properly.
- Clean the transmission pan and apply a new gasket or sealant as required.
Reinstall Transmission Pan:
- Reattach the transmission pan and torque the bolts to the manufacturer’s specifications.
Refill Transmission Fluid:
- Use a funnel to refill the transmission with new fluid through the dipstick tube. Refer to the owner’s manual for the correct type and volume of fluid.

3. Adjust Transmission Settings (if applicable)

Reset Transmission Control Module (TCM):
- Disconnect the vehicle battery for about 15 minutes to reset the TCM.
- Reconnect the battery and start the vehicle, allowing the TCM to relearn shift patterns.