my Genesis G70 transmission jerks when I shift, how do I fix it?

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

530 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Genesis G70. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before opening the transmission system to prevent burns.

Symptoms

•Jerking sensation when shifting gears
•Delayed engagement when moving from park to drive/reverse
•Unusual noises during shifting (clunking or grinding)
•Check engine light illuminated
•Fluid leaks under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burnt fluid.
3
Inspect the transmission mounts for wear or damage that may contribute to movement during shifting.
4
Examine the throttle position sensor and transmission range sensor for proper operation.
5
Test the transmission control module for software updates or malfunctions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Fluid drain pan
•Funnel
•Jack and jack stands

Parts Required

•Transmission fluid (manufacturer-recommended)
•Transmission filter and gasket (if applicable)
•Transmission mounts (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burnt fluid.
3
Inspect the transmission mounts for wear or damage that may contribute to movement during shifting.
4
Examine the throttle position sensor and transmission range sensor for proper operation.
5
Test the transmission control module for software updates or malfunctions.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and secure with wheel chocks.
Disconnect the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Remove the transmission fluid dipstick and check fluid level and condition.
2. If fluid is low or dirty, drain the old transmission fluid using a drain pan.
3. Replace the transmission filter if necessary by removing the pan bolts, then the pan, and replacing the filter.
4. Reinstall the pan with new gasket material and torque bolts to manufacturer specifications.
5. Refill the transmission with new, manufacturer-recommended fluid using a funnel.

3. Inspect and Replace Transmission Mounts (if required)

Sub-steps:
1. Raise the vehicle using a jack and secure it with jack stands.
2. Locate the transmission mounts and visually inspect for cracks or excessive wear.
3. Remove the bolts securing the faulty mounts and lift the transmission slightly to replace them.
4. Install new mounts and torque bolts to the specified manufacturer settings.

4. Reprogram Transmission Control Module (if applicable)

Sub-steps:
1. Connect the OBD-II scanner to the vehicle's diagnostic port.
2. Follow the manufacturer's procedure to update or reprogram the transmission control module software.
3. Clear any existing error codes and perform a test drive.