my Genesis G70 IG (2017-2023) remote start not working what to check

Genesis G70 IG (2017-2023)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

561 words

Problem Statement

Learn how to diagnose and fix remote start issues in Genesis G70 (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent shocks or shorts.

Symptoms

•Remote key fob does not unlock the doors
•Engine does not start when remote start is activated
•"Remote Start Disabled" message displayed on the dashboard
•Check engine light illuminated
•Alarm system may be triggered unexpectedly

Diagnostic Steps

1
Check the battery level of the remote key fob using a multimeter or by replacing it with a new battery.
2
Scan the vehicle's OBD-II system for any error codes that might indicate issues with the remote start system.
3
Verify that the vehicle is in "Park" and that all doors are closed as these are prerequisites for remote starting.
4
Inspect the remote start module wiring for any visible damage or loose connections.
5
Check the vehicle's fuse box for any blown fuses related to the remote start system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Small flathead screwdriver
•Fuse puller
•Basic socket set

Parts Required

•CR2032 battery
•Replacement fuses

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery level of the remote key fob using a multimeter or by replacing it with a new battery.
2
Scan the vehicle's OBD-II system for any error codes that might indicate issues with the remote start system.
3
Verify that the vehicle is in "Park" and that all doors are closed as these are prerequisites for remote starting.
4
Inspect the remote start module wiring for any visible damage or loose connections.
5
Check the vehicle's fuse box for any blown fuses related to the remote start system.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and turned off.
Disconnect the battery to prevent electrical shorts while working.

2. Check and Replace Key Fob Battery

Open the remote key fob using a small flathead screwdriver.
Remove the old battery (typically a CR2032) and replace it with a new one, ensuring the positive side is facing the correct direction.
Reassemble the fob and test the remote start function.

3. Inspect and Replace Fuses

Locate the fuse box in the vehicle (refer to the owner’s manual for exact location).
Identify the fuse related to the remote start system using the diagram on the fuse box cover.
Remove the fuse using a fuse puller and visually inspect it for damage; replace it if blown.
Reconnect the battery and test the remote start feature.

4. Check Remote Start Module Connections

Locate the remote start module, which is typically found under the dashboard or near the engine compartment.
Visually inspect the wiring harness for any signs of wear, damage, or disconnection.
Reconnect any loose connections and repair damaged wires as necessary.

5. Reprogram the Remote Start System (if required)

With the vehicle's ignition turned on (without starting the engine), press and hold the remote start button for 10 seconds.
Follow the specific reprogramming steps outlined in the owner’s manual, if necessary, to reset the remote start system.