FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Genesis G70 IG (2017-2023) remote start not working, how do I troubleshoot? - Genesis G70
Home/Cars/Genesis/G70/IG (2017-2023)/my Genesis G70 IG (2017-2023) remote start not working, how do I troubleshoot?

my Genesis G70 IG (2017-2023) remote start not working, how do I troubleshoot?

Genesis G70 IG (2017-2023)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
524 words

Problem Statement

Learn how to troubleshoot and fix remote start issues in Genesis G70 (2017-2023). Step-by-step guide with diagnostic steps and solutions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems if necessary.

Symptoms

  • •Remote start button unresponsive
  • •No engine start sequence initiated
  • •Dashboard lights may flicker momentarily
  • •Key fob battery may be low or dead
  • •Other remote key functions (lock/unlock) may work normally
  • •Check engine light may be illuminated (if related to remote start system)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Fuse puller
  • •Flathead screwdriver

Parts Required

  • •CR2032 key fob battery
  • •Replacement fuse (if needed)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: OBD-II scanner, multimeter, replacement key fob battery, fuse puller.
  • Ensure the vehicle is parked on a flat surface and the ignition is off.
2. Key Fob Battery Replacement
  1. Open the key fob using a flathead screwdriver or a similar tool.
  2. Remove the old battery and replace it with a new CR2032 battery (or as specified in the owner's manual).
  3. Reassemble the key fob and test the remote start feature.
3. Fuse Inspection and Replacement
  1. Locate the vehicle's fuse box (usually found under the dashboard or in the engine compartment).
  2. Identify the fuse associated with the remote start system (refer to the owner's manual for specific fuse location).
  3. Use a fuse puller to remove the fuse and inspect it for continuity.
  4. If blown, replace it with a new fuse of the same amperage rating.
4. OBD-II Error Code Check
  1. Connect the OBD-II scanner to the vehicle's diagnostic port.
  2. Turn the ignition to the "ON" position without starting the engine.
  3. Scan for any trouble codes related to the remote start system.
  4. Document any codes found and proceed to troubleshoot based on the specific codes.
5. Battery Voltage Check
  1. Use a multimeter to measure the vehicle battery's voltage.
  2. Ensure the voltage is above 12.4 volts; if below, charge the battery.
  3. If the battery is in poor condition, consider replacing it.