my Genesis G70 has an oil leak what's the most common cause

Solution

1. Preparation

• Gather all necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the engine is cool.

2. Identify and Clean

• Identify the Leak Source: Use a clean cloth to wipe away any oil from suspected areas (oil pan, gasket, filter).
• Clean the Area: Use engine degreaser to clean the area around the leak source for better visibility.

3. Replace Seals/Gaskets

• Valve Cover Gasket Replacement:

  • Remove any components obstructing access to the valve cover.
  • Unscrew the valve cover bolts with a socket set.
  • Remove the old gasket and clean the mating surfaces.
  • Install the new gasket and reattach the valve cover, tightening bolts to the manufacturer's torque specification.

• Oil Pan Gasket Replacement:

  • Drain the engine oil using an oil pan.
  • Remove the oil pan by unscrewing the bolts with a socket set.
  • Remove the old gasket, clean the surfaces, and apply a new gasket or sealant as specified by the manufacturer.
  • Reattach the oil pan, ensuring to torque the bolts to the required specifications.

4. Replace Oil Filter

• Use an oil filter wrench to remove the old oil filter.
• Apply a thin layer of oil to the rubber seal of the new filter.
• Install the new oil filter, tightening it by hand.

5. Refill Engine Oil

• Pour the correct type and amount of oil into the engine using a funnel.
• Start the engine and allow it to run for a few minutes, then check for leaks.