how to solve Genesis G70 IG (2017-2023) suspension noise

Genesis G70 IG (2017-2023)

Error Codes

3-5 hours

Time

medium

Difficulty

medium

Severity

3 min read

586 words

Problem Statement

Learn how to diagnose and fix suspension noise in Genesis G70 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Always disconnect the battery before servicing electrical components.

Symptoms

•Clunking or rattling noise when driving over bumps
•Creaking sounds during turns or when weight shifts
•Uneven tire wear
•Poor handling or stability during cornering
•Vibration felt through the steering wheel

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear, damage, or looseness.
2
Perform a bounce test on each corner of the vehicle to check for proper shock absorption.
3
Check the tightness of bolts and nuts on the suspension components, including strut mounts and sway bar links.
4
Use a pry bar to test the play in control arm bushings and ball joints.
5
Lift the vehicle and check for any binding or excessive play in the suspension system by moving components by hand.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench
•Pry bar
•OBD-II scanner

Parts Required

•Replacement struts
•Sway bar links
•Control arm bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear, damage, or looseness.
2
Perform a bounce test on each corner of the vehicle to check for proper shock absorption.
3
Check the tightness of bolts and nuts on the suspension components, including strut mounts and sway bar links.
4
Use a pry bar to test the play in control arm bushings and ball joints.
5
Lift the vehicle and check for any binding or excessive play in the suspension system by moving components by hand.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a level surface, engage the parking brake, and use wheel chocks.
Disconnect the battery if working on electronic components.

2. Raise the Vehicle

Use a hydraulic jack to lift the vehicle and secure it on jack stands.
Remove the front or rear wheels, depending on where the noise is localized.

3. Inspect and Replace Components

A. Struts

Remove the strut assembly by unbolting the upper strut mount bolts and the lower strut bolts.
Inspect the strut for leaks or damage; replace if necessary.
Reinstall the new or refurbished strut and torque to manufacturer specifications (typically around 40-60 lb-ft for the lower bolts).

B. Sway Bar Links

Remove the sway bar links by unbolting them from the sway bar and lower control arm.
Inspect for wear; replace if bushings are cracked or links are bent.
Install new sway bar links and torque to manufacturer specifications (generally 20-30 lb-ft).

C. Control Arm Bushings

If bushings are worn, remove the control arms by unbolting them from the chassis and steering knuckle.
Replace the bushings using a press if required.
Reinstall control arms and torque to specifications (typically 50-65 lb-ft).

4. Reassemble and Lower Vehicle

Reinstall the wheels and torque the lug nuts to the manufacturer's specifications (usually 80-100 lb-ft).
Lower the vehicle back to the ground and remove wheel chocks.

5. Final Check

Reconnect the battery and perform a test drive to listen for any remaining noises.
Check for proper alignment post-repair.