how to fix the remote start not working on my Genesis G70 IG (2017-2023)?

Genesis G70 IG (2017-2023)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

550 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the remote start issue on your Genesis G70 IG (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent shock or short circuits.

Symptoms

•Remote start function does not activate when the button is pressed on the key fob
•No response from the vehicle (e.g., no lights or sounds)
•Check engine light illuminated on the dashboard
•Vehicle may not start with the key fob or ignition switch
•Security system warning or fault message displayed

Diagnostic Steps

1
Check the battery condition of the key fob using a multimeter.
2
Verify that the vehicle is in park and doors are properly closed.
3
Scan the vehicle's OBD-II system for any error codes related to the remote start functionality.
4
Inspect the remote start system fuse for continuity and replace if blown.
5
Examine the vehicle’s battery voltage ensuring it meets the minimum requirement for remote start.
6
Test the key fob’s signal by attempting to start the vehicle from different distances.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Small flathead screwdriver
•Fuse puller or needle-nose pliers

Parts Required

•Key fob battery (CR2032)
•Replacement fuse (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Remote start function does not activate when the button is pressed on the key fob

•No response from the vehicle (e.g., no lights or sounds)

•Check engine light illuminated on the dashboard

•Vehicle may not start with the key fob or ignition switch

•Security system warning or fault message displayed

Diagnostic Steps

1
Check the battery condition of the key fob using a multimeter.
2
Verify that the vehicle is in park and doors are properly closed.
3
Scan the vehicle's OBD-II system for any error codes related to the remote start functionality.
4
Inspect the remote start system fuse for continuity and replace if blown.
5
Examine the vehicle’s battery voltage ensuring it meets the minimum requirement for remote start.
6
Test the key fob’s signal by attempting to start the vehicle from different distances.

Solution

1. Preparation

Gather necessary tools and parts before starting the repair.
Disconnect the vehicle's battery to ensure safety during electrical inspection.

2. Check Key Fob Battery

Open the key fob using a small flathead screwdriver.
Replace the battery with a new CR2032 or appropriate replacement.
Reassemble the key fob and test the remote start function.

3. Inspect Fuses

Locate the fuse box (usually under the dashboard or in the engine compartment).
Identify the fuse associated with the remote start system (refer to your owner’s manual).
Remove the fuse using a fuse puller and inspect it for any breaks.
If necessary, replace the fuse with one of the same amperage rating (typically 10A or 15A).

4. Check Vehicle Battery

Use a multimeter to check the voltage of the vehicle battery; it should be between 12.4V and 12.8V when the vehicle is off.
If the voltage is low, charge the battery or consider replacing it if it's weak or old.

5. Reset the Remote Start System

Reconnect the vehicle battery after performing the checks and repairs.
Turn the ignition key to the "On" position without starting the engine.
Press the remote start button on the key fob and observe if the system responds.