how to fix my Genesis G70’s automatic transmission not shifting correctly?

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

549 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix automatic transmission shifting issues in Genesis G70. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission system.

Symptoms

•Check engine light illuminated
•Harsh or delayed shifting between gears
•Engine revs without corresponding acceleration
•Transmission slipping or unexpected downshifts
•Unusual noises during shifts (clunks or grinding)
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify transmission-related issues.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission control module (TCM) connections for corrosion or loose wires.
4
Test the transmission solenoids using a multimeter to ensure they are operational.
5
Check for any leaks in the transmission system or at the transmission pan gasket.
6
Inspect the vehicle's throttle position sensor (TPS) for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Torque wrench
•Fluid pump or funnel

Parts Required

•Transmission fluid (specific to Genesis G70)
•Transmission filter
•Gasket for transmission pan
•Replacement solenoids (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify transmission-related issues.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission control module (TCM) connections for corrosion or loose wires.
4
Test the transmission solenoids using a multimeter to ensure they are operational.
5
Check for any leaks in the transmission system or at the transmission pan gasket.
6
Inspect the vehicle's throttle position sensor (TPS) for proper operation.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to prevent electrical shorts.
Ensure the vehicle is parked on a level surface.

2. Fluid Change

Drain the Transmission Fluid:
- Remove the transmission pan bolts using a socket set.
- Carefully lower the pan to avoid spilling fluid. Allow the fluid to drain completely.
Replace Transmission Filter:
- Remove the old filter from the transmission.
- Clean the filter mounting surface.
- Install the new transmission filter, ensuring it seats properly.
Install New Gasket:
- Clean the transmission pan and remove any old gasket material.
- Place a new gasket on the pan.
Reinstall the Transmission Pan:
- Position the transmission pan and replace the bolts, tightening them to the manufacturer’s torque specifications (usually around 8-10 Nm).
Add New Transmission Fluid:
- Use the manufacturer-recommended transmission fluid (consult the owner’s manual).
- Fill through the dipstick tube until the proper level is reached (check while the engine is running).

3. Inspect and Replace Solenoids (if necessary)

Remove the Transmission Pan Again:
- Follow the steps outlined in Fluid Change to access the solenoids.
Inspect Solenoids:
- Check for any signs of damage or malfunction.
- Test each solenoid using a multimeter according to the specifications in the service manual.
Replace Faulty Solenoids:
- Disconnect the wiring harness from the solenoid.
- Remove the old solenoid and install the new one, reconnecting the harness.

4. Reconnect Battery

Reconnect the battery terminals securely.