how to fix a worn out shock in my Genesis G70 IG (2017-2023)?

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

514 words

Problem Statement

Learn how to diagnose and fix a worn-out shock absorber in Genesis G70 IG (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a lifted vehicle to prevent accidents.
•Allow the vehicle to cool before working on the brakes or suspension.

Symptoms

•Excessive bouncing after hitting bumps
•Vehicle swaying during turns
•Unusual noises such as clunking or rattling from the suspension
•Increased stopping distance
•Uneven tire wear

Diagnostic Steps

1
Inspect shock absorbers visually for signs of leakage or physical damage.
2
Perform a bounce test on each corner of the vehicle to assess shock response.
3
Check for any error codes using an OBD-II scanner that may relate to suspension issues.
4
Examine surrounding suspension components for wear or damage.
5
Measure the ride height to ensure it is within manufacturer specifications.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench

Parts Required

•New shock absorber(s)
•Upper and lower mounting bolts (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect shock absorbers visually for signs of leakage or physical damage.
2
Perform a bounce test on each corner of the vehicle to assess shock response.
3
Check for any error codes using an OBD-II scanner that may relate to suspension issues.
4
Examine surrounding suspension components for wear or damage.
5
Measure the ride height to ensure it is within manufacturer specifications.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery for safety.

2. Lift the Vehicle

Use a hydraulic jack to lift the vehicle and secure it with jack stands.
Ensure the vehicle is stable before proceeding.

3. Remove the Wheel

Use a lug wrench to remove the lug nuts and take off the wheel.
Store the wheel in a safe location.

4. Remove the Old Shock Absorber

Locate the upper and lower mounting bolts of the shock absorber.
- Tools: Socket set, torque wrench
Remove the upper mounting bolt using a ratchet and socket.
Remove the lower mounting bolt while supporting the shock absorber to prevent it from falling.
Carefully take out the old shock absorber from the mounting points.

5. Install the New Shock Absorber

Position the new shock absorber in the mounting points.
Insert and hand-tighten the lower mounting bolt.
Insert and hand-tighten the upper mounting bolt.
Torque both bolts to the manufacturer's specifications (refer to the service manual for exact values).

6. Reinstall the Wheel

Place the wheel back onto the hub.
Hand-tighten the lug nuts first, then use a torque wrench to tighten them to the specified torque value.

7. Lower the Vehicle

Carefully remove the jack stands and lower the vehicle back to the ground.
Reconnect the battery.