FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix a Genesis G70 IG (2017-2023) that won't shift into gear? - Genesis G70
Home/Cars/Genesis/G70/IG (2017-2023)/how to fix a Genesis G70 IG (2017-2023) that won't shift into gear?

how to fix a Genesis G70 IG (2017-2023) that won't shift into gear?

Genesis G70 IG (2017-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
644 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in Genesis G70 (2017-2023) that won't shift into gear. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems

Symptoms

  • •Transmission warning light illuminated on the dashboard
  • •Difficulty engaging gears (manual or automatic)
  • •Grinding noise when attempting to shift
  • •Delayed engagement or slipping when shifting
  • •Fluid leaks under the vehicle
  • •Unresponsive gear selector

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Transmission fluid pump
  • •Funnel
  • •Drain pan
  • •Socket set
  • •Wrench set
  • •Screwdriver set
  • •Hydraulic jack
  • •Jack stands

Parts Required

  • •Transmission fluid
  • •Transmission filter (if applicable)
  • •Clutch assembly components (if manual)
  • •TCM (if faulty)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
10 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the vehicle battery to ensure safety while working on electrical components.
  • Ensure the vehicle is on a level surface and secure it with wheel chocks.
2. Fluid Inspection and Replacement
  • Tools Required: Transmission fluid pump, funnel, drain pan, socket set.
  • Check the transmission fluid level using the dipstick; add fluid if low.
  • If the fluid is dark or smells burnt:
    1. Place a drain pan under the transmission pan.
    2. Remove the transmission pan bolts using a socket set.
    3. Carefully lower the pan and allow old fluid to drain.
    4. Replace the filter (if applicable) and clean the pan.
    5. Reinstall the pan and torque bolts to the manufacturer's specifications (typically around 10-15 Nm).
    6. Refill with the appropriate type of transmission fluid as per the owner’s manual.
3. Gear Linkage Adjustment or Repair
  • Tools Required: Wrench set, screwdriver set.
  • Inspect the gear linkage:
    1. Locate the gear linkage assembly and check for any loose or damaged components.
    2. If misaligned, adjust the linkage according to the manufacturer’s specifications.
    3. Tighten any loose bolts or replace damaged components.
4. Transmission Control Module (TCM) Testing
  • Tools Required: Multimeter.
  • Inspect the TCM:
    1. Locate the TCM, typically under the dashboard or near the transmission.
    2. Use a multimeter to check for voltage at the TCM connector.
    3. If voltage is incorrect, trace wiring for shorts or open circuits and repair as necessary.
    4. If the TCM is faulty, replace it with a new unit.
5. Clutch Assembly Inspection (Manual Transmission)
  • Tools Required: Socket set, hydraulic jack, jack stands.
  • If the vehicle has a manual transmission:
    1. Raise the vehicle and securely support it with jack stands.
    2. Remove the transmission from the engine by disconnecting the bell housing bolts.
    3. Inspect the clutch disc and pressure plate for wear or damage.
    4. Replace any worn components and reassemble the transmission.