how do I replace the battery in my Genesis G70 IG (2017-2023) key fob?

Genesis G70 IG (2017-2023)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

3 min read

421 words

Problem Statement

Learn how to replace the battery in your Genesis G70 key fob (2017-2023). Step-by-step guide with symptoms, tools, and safety tips included.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Handle the key fob carefully to avoid damaging internal components.

Symptoms

•Key fob not responding to buttons
•Reduced range of key fob signal
•Warning message on the dashboard about key fob battery
•Difficulty starting the vehicle due to key fob not recognized

Diagnostic Steps

1
Verify that the key fob is indeed not working by trying to unlock the doors from different distances.
2
Inspect the key fob for any physical damage or signs of wear.
3
Check if the vehicle can be started using the emergency key blade, if applicable.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flat-head screwdriver
•Coin

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: small flat-head screwdriver or a coin, and a replacement battery (CR2032).
Ensure you are in a clean, well-lit area to avoid losing small components.

2. Open the Key Fob

Locate the seam on the edge of the key fob.
Use a small flat-head screwdriver or a coin to gently pry open the key fob at the seam. Start at one end and work your way around until the two halves separate.

3. Remove the Old Battery

Once the key fob is open, locate the battery compartment.
Carefully remove the old battery by gently lifting it out with your fingers or the flat-head screwdriver. Note the orientation (positive side facing up or down).

4. Install the New Battery

Take the new CR2032 battery and insert it into the compartment in the same orientation as the old battery. Ensure it fits snugly in place.

5. Reassemble the Key Fob

Align the two halves of the key fob and press them together until you hear a click, indicating that they are securely closed.