why does my Genesis G70's transmission slip when shifting

Genesis G70 1st Gen (2018-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

495 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping issues in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any work on the transmission.

Symptoms

•Transmission slips during acceleration
•Unusual engine revving without corresponding vehicle speed increase
•Delayed or harsh shifting between gears
•Check engine light illuminated
•Fluid leaks under the vehicle
•Burning smell from the transmission area

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify transmission-related codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Inspect transmission fluid lines and seals for leaks or damage.
4
Test the transmission solenoids for proper operation with a multimeter.
5
Examine the condition of the transmission filter and replace if necessary.
6
Check the throttle position sensor (TPS) for proper function, as it affects shifting behavior.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Torque wrench
•Fluid pump
•Socket set
•Multimeter

Parts Required

•Transmission fluid (manufacturer's specification)
•Transmission filter
•Transmission solenoids (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify transmission-related codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Inspect transmission fluid lines and seals for leaks or damage.
4
Test the transmission solenoids for proper operation with a multimeter.
5
Examine the condition of the transmission filter and replace if necessary.
6
Check the throttle position sensor (TPS) for proper function, as it affects shifting behavior.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a level surface and engage the parking brake.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Remove the transmission fluid dipstick or pan, depending on access.
2. If necessary, drain the old transmission fluid into a suitable container.
3. Replace the transmission fluid with the manufacturer-recommended fluid type (check owner's manual for specifications).
4. Reinsert the dipstick or reattach the pan, ensuring a proper seal.
Tools Required: Torque wrench, fluid pump, transmission fluid.

3. Inspect and Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan to access the filter (if applicable).
2. Remove the old transmission filter and install a new filter.
3. Clean the pan and magnet inside it, then reattach the pan using the specified torque settings.
Tools Required: Socket set, gasket scraper, new transmission filter, RTV sealant (if needed).

4. Test Transmission Solenoids

Sub-steps:
1. Disconnect the electrical connector to the transmission solenoids.
2. Use a multimeter to check for proper resistance (refer to service manual for specifications).
3. Replace faulty solenoids if they do not meet specifications.
Tools Required: Multimeter, socket set.