why does my Genesis G70 shake when I accelerate

Genesis G70 1st Gen (2018-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

462 words

Problem Statement

Discover the causes of shaking during acceleration in Genesis G70. Follow our diagnostic steps and solutions to resolve the issue effectively.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported before working underneath.
•Disconnect the battery before working on electrical components.

Symptoms

•Vibrations felt through the steering wheel
•Shaking in the driver's seat
•Increased noise during acceleration
•Possible loss of power or hesitation
•Uneven tire wear

Diagnostic Steps

1
Inspect tires for damage, imbalance, or uneven wear patterns.
2
Check wheel alignment and balance using a professional alignment machine.
3
Examine the driveshaft and CV joints for signs of wear or damage.
4
Inspect engine and transmission mounts for signs of deterioration or failure.
5
Scan the vehicle's computer for any error codes related to the drivetrain or engine performance.
6
Test drive the vehicle at various speeds to replicate the shaking and note the conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack and jack stands
•Wheel alignment machine
•Socket set
•Pry bar

Parts Required

•Tires (if worn or damaged)
•Weights for wheel balancing (if needed)
•Engine or transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for damage, imbalance, or uneven wear patterns.
2
Check wheel alignment and balance using a professional alignment machine.
3
Examine the driveshaft and CV joints for signs of wear or damage.
4
Inspect engine and transmission mounts for signs of deterioration or failure.
5
Scan the vehicle's computer for any error codes related to the drivetrain or engine performance.
6
Test drive the vehicle at various speeds to replicate the shaking and note the conditions.

Solution

1. Tire Inspection

Sub-steps:
1. Remove the wheel covers or hubcaps if applicable.
2. Visually inspect tires for bulges, cracks, or punctures.
3. Check tire pressure and inflate to manufacturer specifications.
4. If uneven wear is present, consider rotating or replacing tires.

2. Wheel Alignment and Balancing

Sub-steps:
1. Take the vehicle to a professional shop for alignment and balance check.
2. Adjust alignment angles (camber, caster, toe) to specifications.
3. Balance wheels using a wheel balancing machine, adding weights as necessary.

3. Inspect Driveshaft and CV Joints

Sub-steps:
1. Raise the vehicle securely on jack stands.
2. Inspect the driveshaft for any visible damage or excessive play.
3. Check CV joints for cracks or tears in the rubber boots.
4. Replace any damaged components as needed.

4. Engine and Transmission Mounts Inspection

Sub-steps:
1. Visually inspect mounts for cracks or separation from the chassis.
2. Use a pry bar to check for excessive movement of the engine/transmission.
3. Replace any worn or damaged mounts with new OEM parts.