why does my Genesis G70 shake when I accelerate?

Genesis G70 1st Gen (2018-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

485 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Disconnect the battery before working on electrical components.

Symptoms

•Vibration felt through the steering wheel
•Shaking in the driver's seat
•Noise accompanying the shake (such as grinding or thumping)
•Uneven tire wear
•Loss of power during acceleration

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer's specifications.
3
Perform a visual inspection of suspension components for wear or damage.
4
Examine driveshaft and CV joints for play or damage.
5
Test engine and transmission mounts for deterioration or failure.
6
Use an OBD-II scanner to check for any related error codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Torque wrench
•Lug wrench
•Basic hand tools (sockets, wrenches)

Parts Required

•New tires (if applicable)
•Suspension components (if needed)
•Driveshaft or CV joints (if needed)
•Engine or transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer's specifications.
3
Perform a visual inspection of suspension components for wear or damage.
4
Examine driveshaft and CV joints for play or damage.
5
Test engine and transmission mounts for deterioration or failure.
6
Use an OBD-II scanner to check for any related error codes.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Inspect and Replace Tires

Sub-steps:
- Remove wheel covers or hubcaps if applicable.
- Loosen the lug nuts with a lug wrench.
- Lift the vehicle using a jack and secure with jack stands.
- Remove tires and inspect for uneven wear or damage.
- Replace any damaged tires with new ones.
- Reinstall tires and torque lug nuts to manufacturer specifications (typically around 80-100 ft-lbs).

3. Inspect Suspension Components

Sub-steps:
- Check struts, shocks, and bushings for wear or leaks.
- Replace any worn components with OEM or high-quality aftermarket parts.
- Reassemble and torque bolts to manufacturer specifications.

4. Inspect Driveshaft and CV Joints

Sub-steps:
- Support the vehicle on jack stands and remove any undercarriage covers if needed.
- Examine the driveshaft for bends or damage.
- Inspect CV joints for torn boots or play.
- Replace damaged driveshaft or CV joints as necessary.

5. Check Engine and Transmission Mounts

Sub-steps:
- Visually inspect the mounts for cracks or deterioration.
- Replace any failed mounts with new units.
- Ensure all mounting bolts are tightened to specifications.