why does my Genesis G70 jerks when shifting gears

Genesis G70 1st Gen (2018-Present)

Error Codes

3-5 hours

Time

medium

Difficulty

high

Severity

3 min read

585 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow engine to cool before opening transmission components.

Symptoms

•Jerking or harsh shifting when changing gears
•Delayed engagement when shifting from park to drive or reverse
•Unusual noises during gear changes (clunking or grinding)
•Check engine light illuminated
•Decreased acceleration or power delivery

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related faults.
2
Check the transmission fluid level and condition (color, smell, and debris).
3
Inspect the transmission mounts for any signs of wear or damage.
4
Examine the throttle position sensor for proper operation and calibration.
5
Test the transmission solenoids for electrical function and mechanical operation.
6
Perform a road test to replicate the jerking issue while monitoring engine RPMs and transmission response.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Torque wrench
•Multimeter
•Socket set
•Funnel
•Fluid catch pan
•Jack and jack stands

Parts Required

•Transmission fluid
•Transmission filter
•Transmission mounts
•Throttle position sensor (if faulty)
•Transmission solenoids (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related faults.
2
Check the transmission fluid level and condition (color, smell, and debris).
3
Inspect the transmission mounts for any signs of wear or damage.
4
Examine the throttle position sensor for proper operation and calibration.
5
Test the transmission solenoids for electrical function and mechanical operation.
6
Perform a road test to replicate the jerking issue while monitoring engine RPMs and transmission response.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent any electrical issues during repair.

2. Check and Replace Transmission Fluid

Tools Required: Torque wrench, funnel, fluid catch pan.
Remove the transmission pan using the socket set.
Drain the old transmission fluid into the catch pan.
Inspect the transmission filter for debris and replace if necessary.
Reinstall the pan with a new gasket, torque bolts to manufacturer specifications.
Fill the transmission with the appropriate type and amount of fluid as specified in the owner's manual.

3. Inspect and Replace Transmission Mounts

Tools Required: Jack and jack stands, socket set, torque wrench.
Lift the vehicle securely using the jack and jack stands.
Locate and visually inspect the transmission mounts for cracks or excessive wear.
If damaged, remove the old mounts and install new ones, torquing bolts to manufacturer specifications.

4. Test and Replace Throttle Position Sensor (if necessary)

Tools Required: Multimeter, socket set.
Disconnect the throttle position sensor wiring harness.
Use a multimeter to check the sensor's resistance and ensure it falls within manufacturer specifications.
If out of range, replace the throttle position sensor and reconnect the wiring harness.

5. Inspect Transmission Solenoids

Tools Required: Torque wrench, socket set, multimeter.
Access the transmission solenoids by removing the transmission valve body cover.
Check the solenoid operation with a multimeter.
Replace any faulty solenoids and reassemble the valve body cover, torquing bolts to specifications.