my Genesis G70 jerks when shifting gears what's wrong

Genesis G70 1st Gen (2018-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

521 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission pan.

Symptoms

•Jerking sensation during gear shifts
•Delayed engagement when shifting from park to drive or reverse
•Unusual noises during shifting (clunking or grinding)
•Check engine light illuminated (if applicable)
•Poor acceleration performance

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential transmission-related faults.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission mounts for signs of wear or damage.
4
Evaluate the throttle position sensor (TPS) functionality with a multimeter.
5
Test drive the vehicle to replicate the jerking issue while monitoring engine RPM and transmission response.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Torque wrench
•Transmission fluid

Parts Required

•Transmission filter (if applicable)
•New transmission fluid
•Transmission mounts (if needed)
•Throttle position sensor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential transmission-related faults.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission mounts for signs of wear or damage.
4
Evaluate the throttle position sensor (TPS) functionality with a multimeter.
5
Test drive the vehicle to replicate the jerking issue while monitoring engine RPM and transmission response.

Solution

1. Preparation

Gather tools: OBD-II scanner, socket set, multimeter, transmission fluid, and a torque wrench.
Ensure the vehicle is parked on a level surface and the engine is cool.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Remove the transmission dipstick and inspect the fluid level and color.
2. If low or burnt, place a drain pan under the transmission pan and remove the pan bolts.
3. Carefully lower the pan and drain the old fluid.
4. Replace the filter if applicable (use a transmission filter kit).
5. Reinstall the pan with a new gasket and torque the bolts to the manufacturer’s specifications (typically around 10-12 ft-lbs).
6. Fill the transmission with new fluid through the dipstick tube, using the correct type (check owner’s manual for specifications).

3. Inspect and Replace Transmission Mounts (if damaged)

Sub-steps:
1. Raise the vehicle using a jack and secure it with jack stands.
2. Locate the transmission mounts; inspect for cracks, wear, or separation.
3. If damaged, remove the bolts securing the mount to the transmission and the frame.
4. Replace with new mounts and torque the bolts to the specified value.

4. Test Throttle Position Sensor

Sub-steps:
1. Disconnect the TPS connector.
2. Using a multimeter, check the voltage output while moving the throttle. It should vary smoothly without drops or spikes.
3. If faulty, replace the TPS with a new unit and reconnect.