why is my Ford Mustang S650 (2024-Present) engine making a ticking noise

Solution

1. Preparation

• Gather the necessary tools and parts.
• Ensure the vehicle is parked on a level surface.
• Disconnect the battery to avoid any electrical short circuits.

2. Change Engine Oil and Filter

• Sub-steps:
  1. Raise the vehicle using jack stands.
  2. Place a drain pan under the oil pan.
  3. Remove the oil drain plug and let the old oil drain completely.
  4. Replace the oil filter using an oil filter wrench.
  5. Reinstall the drain plug and tighten to the manufacturer's torque specification (typically around 20-25 lb-ft).
  6. Fill the engine with the recommended oil type (e.g., 5W-30) up to the full mark on the dipstick.
• Tools Required: Socket set, oil filter wrench, torque wrench, oil drain pan.

3. Inspect and Adjust Valvetrain Components

• Sub-steps:
  1. Remove the engine cover to access the valvetrain.
  2. Inspect for any loose or damaged rocker arms, pushrods, or lifters.
  3. Adjust valve lash if necessary, following the manufacturer's specifications.
  4. Reinstall the engine cover and ensure all bolts are properly torqued.
• Tools Required: Socket set, feeler gauge, torque wrench.

4. Replace Faulty Components

• Sub-steps:
  1. If any damaged components are found in the valvetrain or elsewhere, order replacement parts.
  2. Remove and replace the faulty components, ensuring proper alignment and installation.
  3. Perform a final inspection to ensure everything is securely installed.
• Tools Required: Various hand tools depending on components replaced.