FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Mustang S650 has a bad smell coming from the exhaust - Ford Mustang
Home/Cars/Ford/Mustang/S650 (2024-Present)/my Ford Mustang S650 has a bad smell coming from the exhaust

my Ford Mustang S650 has a bad smell coming from the exhaust

Ford Mustang S650 (2024-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
541 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix exhaust smell issues in Ford Mustang S650. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Exhaust System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting the exhaust components.

Symptoms

  • •Strong sulfur or rotten egg smell from the exhaust
  • •Excessive smoke from the tailpipe
  • •Decreased engine performance or power
  • •Check engine light illuminated
  • •Poor fuel economy
  • •Unusual noises from the engine bay

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Safety goggles
  • •Gloves

Parts Required

  • •Catalytic converter (if necessary)
  • •O2 sensors (if necessary)
  • •Spark plugs

Additional Information

Affected Component
Exhaust System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and safety equipment.
  • Disconnect the battery to avoid electrical hazards.

Tools Required:

  • OBD-II scanner
  • Multimeter
  • Socket set
  • Torque wrench
  • Safety goggles
  • Gloves
2. Inspect and Replace the Catalytic Converter (if necessary)

  1. Remove Exhaust Components:

    • Loosen any clamps or bolts securing the exhaust system.
    • Remove the exhaust pipe connected to the catalytic converter.

  2. Inspect the Catalytic Converter:

    • Check for visible damage, discoloration, or signs of overheating.
    • Use a heat gun to check for excessive temperature differences between inlet and outlet.

  3. Replace the Catalytic Converter:

    • Install a new catalytic converter, ensuring correct alignment.
    • Torque bolts to manufacturer specifications (usually around 30-50 ft-lbs).
    • Reattach exhaust pipe with clamps and ensure there are no leaks.
3. Check and Replace Faulty Sensors

  1. Remove O2 Sensors:

    • Locate and unplug the upstream and downstream O2 sensors.
    • Use a socket to remove the sensors.

  2. Inspect Sensors:

    • Check for signs of fouling or damage.
    • Replace any faulty sensors with new ones.

  3. Reinstall Sensors:

    • Install new sensors and torque to manufacturer specifications (typically around 30 ft-lbs).
4. Adjust Air-Fuel Mixture

  1. Check Fuel Trim Values:

    • Use the OBD-II scanner to monitor fuel trims.
    • If they are outside of the normal range, consider adjusting the air-fuel mixture or checking for vacuum leaks.

  2. Replace Spark Plugs:

    • Remove spark plug wires and unscrew the old spark plugs.
    • Install new spark plugs with the recommended gap (usually 0.030-0.035 inches).
    • Torque the spark plugs to manufacturer specifications (approximately 15-20 ft-lbs).