my Ford Mustang S650 (2024-Present) has a squeaking sound when going over bumps, what to check?

Ford Mustang S650 (2024-Present)

Error Codes

3-5 hours

Time

medium

Difficulty

medium

Severity

3 min read

556 words

Problem Statement

Learn how to diagnose and fix the squeaking noise in your 2024 Ford Mustang S650's suspension. Step-by-step guide with tools and parts required.

Affected Component

Suspension

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported before working underneath it.
•Allow the suspension components to settle before tightening bolts to avoid misalignment.

Symptoms

•Squeaking noise when driving over bumps
•Noise may be more pronounced during sharp turns
•Possible vibration felt through the steering wheel
•Increased tire wear on affected wheels
•No error codes present on the OBD-II scanner

Diagnostic Steps

1
Inspect suspension components visually for wear or damage.
2
Check for loose or damaged bushings in control arms and sway bars.
3
Verify the condition of shock absorbers/struts for leaks or wear.
4
Examine the springs for corrosion or broken coils.
5
Perform a bounce test on the vehicle to assess shock absorber functionality.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench
•Bushing removal tool
•Spring compressor

Parts Required

•Replacement bushings (control arms and sway bar)
•Shock absorbers/struts
•Coil springs (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect suspension components visually for wear or damage.
2
Check for loose or damaged bushings in control arms and sway bars.
3
Verify the condition of shock absorbers/struts for leaks or wear.
4
Examine the springs for corrosion or broken coils.
5
Perform a bounce test on the vehicle to assess shock absorber functionality.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Safely lift the vehicle using a hydraulic jack and secure it with jack stands.

2. Inspect and Replace Bushings

Inspect Bushings:
- Use a socket set to remove the bolts securing control arms and sway bar links.
- Visually inspect bushings for cracks or excessive wear.
Replace Damaged Bushings:
- Remove the old bushings using a bushing removal tool.
- Apply grease to the new bushings before installation.
- Install new bushings and reattach control arms and sway bar links, tightening to manufacturer torque specifications (typically around 40-60 ft-lbs).

3. Inspect and Replace Shock Absorbers/Struts

Check for Leaks:
- Inspect shocks/struts for signs of fluid leakage.
Remove Old Shock Absorbers:
- Use a socket set to detach the top and bottom bolts of the shock absorber.
- Remove the shock absorber from the vehicle.
Install New Shock Absorbers:
- Position the new shock absorber in place and secure it with bolts.
- Torque bolts to specified values (usually around 30-40 ft-lbs for the top and 50-70 ft-lbs for the bottom).

4. Inspect and Replace Springs (if necessary)

Check Springs:
- Look for signs of corrosion or broken coils.
Remove Old Springs:
- Use a spring compressor to safely decompress and remove coil springs.
Install New Springs:
- Position new springs and carefully release the spring compressor.

5. Reassemble and Lower Vehicle

Reattach any components removed during inspection/repair.
Lower the vehicle carefully and remove jack stands.
Tighten all lug nuts to manufacturer specifications (typically around 100-120 ft-lbs).