how to reset the oil change light in my Ford Mustang S650 (2024-Present)

Ford Mustang S650 (2024-Present)

less than 10 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the oil change light in your 2024 Ford Mustang S650. Step-by-step guide to ensure your dashboard is clear of warning lights.

Affected Component

Engine

Estimated Time

less than 10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and the engine is off while performing the reset procedure.

1
Ensure the vehicle is in the ON position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition off and then back on to check if the oil change light is reset.
4
If the light remains on, repeat the process or consult the owner's manual for specific procedures.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the ON position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition off and then back on to check if the oil change light is reset.
4
If the light remains on, repeat the process or consult the owner's manual for specific procedures.

Solution

1. Preparation

2. Resetting the Oil Change Light

Turn on the Ignition:
- Insert the key and turn the ignition to the ON position without starting the engine.
Accelerate Pedal Action:
- Press the gas pedal three times quickly within a span of 10 seconds.
Turn Off Ignition:
- Turn the ignition switch to the OFF position.
Check the Light:
- Turn the ignition back to the ON position again and check to see if the oil change light is off.