FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Ford Mustang S650 (2024-Present) - Ford Mustang
Home/Cars/Ford/Mustang/S650 (2024-Present)/how to reset the maintenance light on Ford Mustang S650 (2024-Present)

how to reset the maintenance light on Ford Mustang S650 (2024-Present)

Ford Mustang S650 (2024-Present)

Error Codes
15-30 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
328 words

Problem Statement

Learn how to reset the maintenance light on your 2024 Ford Mustang S650. Step-by-step guide to ensure your maintenance light is extinguished.

Affected Component
Electrical
Estimated Time
15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary and in park before performing the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •The vehicle may display 'Service Required' message
  • •No other performance issues or symptoms present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner (optional)

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
15-30 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: OBD-II scanner (if needed), vehicle owner's manual.
  • Ensure the vehicle is parked on a level surface with the engine off.
2. Resetting the Maintenance Light
  1. Turn Ignition On: Insert the key and turn it to the "ON" position (do not start the engine).
  2. Accelerator Pedal Sequence:
    • Fully press and release the accelerator pedal three times within five seconds.
  3. Turn Ignition Off: Switch the ignition off completely.
  4. Turn Ignition Back On: Turn the ignition to the "ON" position again (do not start the engine).
  5. Confirm Reset: Check the dashboard to ensure the maintenance light is extinguished.