why does my Ford Mustang S550 (2015-2023) make a grinding noise when turning

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and engage the parking brake.
• Disconnect the battery to ensure safety while working.

2. Power Steering Inspection

• Tools Required: OBD-II scanner, fluid siphon, clean container.
• Remove the power steering reservoir cap and check the fluid level.
• If low, siphon out any contaminated fluid and replace it with manufacturer-recommended fluid.
• Inspect the hose connections for signs of leaks or deterioration.

3. Inspect Steering Components

• Tools Required: Socket set, torque wrench.
• Use a socket set to remove the wheels for better access.
• Visually inspect tie rods, ball joints, and bushings for wear or damage.
• If any components are found to be worn, replace them according to manufacturer specifications.

4. Wheel Bearing Check

• Tools Required: Jack and jack stands, torque wrench.
• Raise the vehicle and secure it with jack stands.
• Grasp each wheel and attempt to wiggle it to check for play.
• If any wheel bearing is loose or rough, it should be replaced.

5. Suspension Component Assessment

• Tools Required: Torque wrench, socket set.
• Inspect the struts and shocks for leakage or physical damage.
• Check the condition of the sway bar links and control arms for signs of wear.
• Replace any damaged suspension parts as needed.

6. Tire Inspection

• Inspect tires for uneven wear patterns that could indicate alignment or suspension issues.
• If necessary, rotate the tires and align the vehicle.