FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford Mustang S550 (2015-2023) hesitate when I accelerate - Ford Mustang
Home/Cars/Ford/Mustang/S550 (2015-2023)/why does my Ford Mustang S550 (2015-2023) hesitate when I accelerate

why does my Ford Mustang S550 (2015-2023) hesitate when I accelerate

Ford Mustang S550 (2015-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
557 words

Problem Statement

Learn how to diagnose and fix hesitation during acceleration in Ford Mustang S550 (2015-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid shocks or shorts.
  • •Relieve fuel pressure before disconnecting fuel lines to prevent fuel spray.

Symptoms

  • •Hesitation or stuttering during acceleration
  • •Decreased engine power
  • •Check engine light illuminated
  • •Poor fuel economy
  • •Engine misfires at higher RPMs

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Throttle body cleaner
  • •Multimeter

Parts Required

  • •Spark plugs
  • •Ignition coils (if needed)
  • •Fuel filter (if applicable)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Check Fuel System
  1. Test Fuel Pressure

    • Connect a fuel pressure gauge to the fuel rail.
    • Turn the ignition to the "ON" position without starting the engine and check the pressure reading.
    • Ensure the pressure is within the manufacturer's specifications (typically around 40-60 psi).
  2. Replace Fuel Filter (if applicable)

    • Locate the fuel filter, usually near the fuel tank or along the fuel line.
    • Relieve fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.
    • Disconnect the fuel lines and remove the filter.
    • Install the new filter in the correct orientation and reconnect fuel lines.
3. Inspect Ignition System
  1. Replace Spark Plugs

    • Remove the ignition coils by unbolting them.
    • Pull out the spark plugs using a spark plug socket.
    • Inspect the plugs for fouling or wear. Replace with OEM or high-quality aftermarket plugs at the manufacturer's recommended gap.
  2. Test and Replace Ignition Coils (if necessary)

    • Check for any visible cracks or damage on ignition coils.
    • Use a multimeter to test the coils' resistance. Replace any that are out of spec.
4. Clean Throttle Body
  1. Remove Throttle Body

    • Disconnect the throttle body electrical connector.
    • Remove the intake duct and unbolt the throttle body from the intake manifold.
  2. Clean Throttle Body

    • Use throttle body cleaner and a soft cloth or brush to clean the inside of the throttle body.
    • Ensure the throttle plate operates smoothly.
5. Reassemble and Test
  • Reinstall the throttle body, reconnect all electrical connectors, and reattach the intake duct.
  • Reconnect the negative battery terminal.