FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford Mustang S550 (2015-2023) check engine light come on and off - Ford Mustang
Home/Cars/Ford/Mustang/S550 (2015-2023)/why does my Ford Mustang S550 (2015-2023) check engine light come on and off

why does my Ford Mustang S550 (2015-2023) check engine light come on and off

Ford Mustang S550 (2015-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
529 words

Problem Statement

Learn how to diagnose and fix the intermittent check engine light issue in Ford Mustang S550 (2015-2023). Step-by-step guide with diagnostic procedures.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting or working on the engine components.

Symptoms

  • •Check engine light illuminated intermittently
  • •Decreased fuel efficiency
  • •Engine misfire or rough idling
  • •Unusual engine noises (knocking or pinging)
  • •Failed emissions test (if applicable)
  • •Increased exhaust emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Smoke machine (for vacuum leak detection)

Parts Required

  • •Spark plugs (if worn)
  • •Ignition coils (if faulty)
  • •Air filter (if dirty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to avoid electrical shorts during repairs.
2. Address Fault Codes
  • Use the OBD-II scanner to read and document any error codes.
  • Clear the codes and monitor if they return after a short drive.
3. Inspect and Replace Spark Plugs/Ignition Coils (if necessary)
  • Remove the ignition coil covers using a socket set.
  • Disconnect electrical connectors from the ignition coils.
  • Remove the ignition coils and inspect the spark plugs.
    • If worn or damaged, replace them with OEM-spec plugs.
  • Reinstall ignition coils and covers, tightening to manufacturer specifications (typically 7-9 Nm).
4. Inspect the Air Intake System
  • Visually check the air intake hose for cracks or looseness.
  • Remove the air filter and clean the air intake area if necessary.
  • Replace the air filter if it’s dirty or clogged.
5. Fuel System Check
  • Connect a fuel pressure gauge to the fuel rail.
  • Start the engine and check if fuel pressure is within specifications (typically around 40-60 psi for Mustang).
  • If pressure is low, inspect the fuel pump and filter for issues.
6. Vacuum Leak Inspection
  • Use a smoke machine to detect vacuum leaks or visually inspect all hoses.
  • Replace any damaged hoses and ensure all connections are secure.