my Ford Mustang S550 (2015-2023) won't shift into gear what's happening

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the parking brake is engaged.
• Disconnect the battery to prevent electrical shorts.

2. Check Transmission Fluid

• Tools Required: Transmission funnel, fluid catch pan.
• Remove the transmission dipstick and check fluid level.
• If low, add the manufacturer-recommended transmission fluid until it reaches the proper level.
• If fluid is contaminated, proceed to fluid replacement.

3. Replace Transmission Fluid (if necessary)

• Tools Required: Socket set, fluid catch pan, transmission fluid pump.
• Remove the transmission pan bolts and carefully lower the pan.
• Drain the old fluid into the catch pan.
• Replace the transmission filter if applicable.
• Reinstall the pan with a new gasket and torque bolts to the manufacturer's specifications.
• Fill the transmission with new fluid through the dipstick tube.

4. Inspect and Adjust Shift Linkage

• Tools Required: Wrench set, pliers.
• Locate the shift linkage and inspect for damage or disconnection.
• Adjust the linkage as necessary to ensure proper alignment and engagement.
• Secure any loose connections.

5. Test Clutch Operation (Manual Transmission)

• Tools Required: None.
• Start the engine and press the clutch pedal fully.
• Shift through all gears to check for smooth engagement.
• If the clutch does not engage properly, further inspection or replacement may be necessary.