FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Mustang S550 (2015-2023) smells like burning oil what's causing it - Ford Mustang
Home/Cars/Ford/Mustang/S550 (2015-2023)/my Ford Mustang S550 (2015-2023) smells like burning oil what's causing it

my Ford Mustang S550 (2015-2023) smells like burning oil what's causing it

Ford Mustang S550 (2015-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
522 words

Problem Statement

Learn how to diagnose and fix the burning oil smell in your Ford Mustang S550 (2015-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the engine is cool before working to prevent burns.
  • •Always dispose of used oil and filters according to local regulations.

Symptoms

  • •Burning oil smell inside or outside the vehicle
  • •Oil spots or puddles under the car
  • •Engine overheating
  • •Increased oil consumption
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Torque wrench
  • •Oil filter wrench
  • •Oil catch pan
  • •Degreaser
  • •Lint-free cloth

Parts Required

  • •Valve cover gaskets
  • •Oil filter
  • •Engine oil

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface with the engine cool.
2. Inspect and Clean
  • Sub-steps:
    • Open the hood and inspect the engine for any visible oil leaks.
    • Clean any oil residue with a degreaser to identify the source of the leak more easily.
    • Use a lint-free cloth to wipe down affected areas.
3. Replace Damaged Components
  • Sub-steps:
    • If leaks are identified at the valve cover gaskets, remove the bolts securing the valve cover using a socket set.
    • Carefully lift the valve cover off and replace the old gaskets with new ones, ensuring they are aligned correctly.
    • Reinstall the valve cover and torque the bolts to manufacturer specifications (typically around 10-15 ft-lbs).
    • If the oil filter is leaking, replace it with a new filter. Ensure the rubber O-ring is lubricated and seated properly before installation.
4. Check Oil Level and Condition
  • Sub-steps:
    • Remove the dipstick and check the oil level; add oil if low, using the manufacturer-recommended oil type.
    • Inspect the oil condition; if it appears dark or contaminated, consider an oil change.
5. Monitor for Further Issues
  • Sub-steps:
    • Start the engine and allow it to reach operating temperature while observing for any new leaks.
    • Monitor the oil pressure gauge (if equipped) to ensure proper oil pressure is maintained.