FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Mustang S550 (2015-2023) has a check engine light and smells like gas - Ford Mustang
Home/Cars/Ford/Mustang/S550 (2015-2023)/my Ford Mustang S550 (2015-2023) has a check engine light and smells like gas

my Ford Mustang S550 (2015-2023) has a check engine light and smells like gas

Ford Mustang S550 (2015-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
615 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel system issues causing check engine light in Ford Mustang S550 (2015-2023). Step-by-step guide included.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting the fuel system.
  • •Work in a well-ventilated area to avoid inhaling gasoline fumes.

Symptoms

  • •Check engine light illuminated
  • •Strong gasoline smell around the vehicle
  • •Possible rough idling or stalling
  • •Decreased fuel efficiency
  • •Fuel leakage under the vehicle
  • •Increased emissions from the exhaust

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Wrenches
  • •Fuel line removal tool
  • •Torque wrench
  • •Pick tool
  • •Fuel pressure gauge
  • •Smoke machine or EVAP leak detection tool

Parts Required

  • •Replacement fuel lines
  • •Fuel injector seals
  • •Fuel pressure regulator
  • •EVAP system components (if needed)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
8 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect and Replace Fuel Lines
  • Tools Required: Socket set, wrenches, fuel line removal tool.
  • Sub-steps:
    1. Visually inspect the fuel lines for cracks, leaks, or corrosion.
    2. If damaged, relieve the fuel pressure by removing the fuel pump fuse and starting the engine until it stalls.
    3. Disconnect the old fuel lines using the fuel line removal tool and replace with new lines, ensuring a secure fit.
    4. Tighten connections to manufacturer specifications.
3. Replace Fuel Injector Seals
  • Tools Required: Torque wrench, socket set, pick tool.
  • Sub-steps:
    1. Remove the intake manifold if necessary for access to the fuel injectors.
    2. Carefully disconnect the electrical connectors from each fuel injector.
    3. Remove the fuel rail bolts and lift the fuel rail with injectors attached.
    4. Replace the old seals on each injector with new ones.
    5. Reassemble the fuel rail and manifold, torqueing bolts to the specified values.
4. Check and Replace the Fuel Pressure Regulator
  • Tools Required: Socket set, fuel pressure gauge.
  • Sub-steps:
    1. Locate the fuel pressure regulator, typically found on the fuel rail.
    2. Disconnect the vacuum line and electrical connector.
    3. Remove the regulator from the rail and check for signs of fuel leakage.
    4. Install a new regulator and reconnect all lines and connectors.
5. Inspect EVAP System
  • Tools Required: Smoke machine or EVAP leak detection tool.
  • Sub-steps:
    1. Connect a smoke machine to the EVAP system to check for leaks.
    2. Inspect all hoses, valves, and the charcoal canister for damage.
    3. Replace any faulty components as needed.