how to reset the TPMS light in Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

448 words

Problem Statement

Learn how to reset the TPMS light on your 2021-present Ford F-150. Step-by-step instructions to ensure proper tire pressure monitoring system functionality.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure that tires are properly inflated before resetting the TPMS to avoid driving on under-inflated tires.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inconsistent tire pressure readings
•Low tire pressure warning
•Tire pressure light remains on after tires have been inflated
•Vehicle may handle differently due to tire pressure discrepancies

Diagnostic Steps

1
Inspect all tires for proper inflation using a tire pressure gauge.
2
Check for any visible damage to tires, such as punctures or sidewall damage.
3
Verify that the TPMS sensors are functioning by using an OBD-II scanner to check for error codes.
4
Review the vehicle's manual for the correct TPMS reset procedure specific to the model.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner (if needed)

Parts Required

•None for the reset; however, if sensors are faulty, replacement TPMS sensors may be needed.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect all tires for proper inflation using a tire pressure gauge.
2
Check for any visible damage to tires, such as punctures or sidewall damage.
3
Verify that the TPMS sensors are functioning by using an OBD-II scanner to check for error codes.
4
Review the vehicle's manual for the correct TPMS reset procedure specific to the model.

Solution

1. Preparation

Tools Required: Tire pressure gauge, OBD-II scanner (if needed).
Ensure all tires are inflated to the manufacturer's recommended pressure levels, as indicated on the driver's side door jamb.

2. Resetting the TPMS

Turn the Ignition On
- Insert the key or push the start button to turn on the vehicle without starting the engine.
Locate the TPMS Reset Button
- The TPMS reset button is usually located beneath the steering column or near the fuse box.
- Consult the owner's manual for the exact location if necessary.
Press and Hold the TPMS Reset Button
- Press and hold the TPMS reset button until the TPMS light blinks three times and then turns off.
- This may take about 3-5 seconds.
Start the Engine
- Turn the ignition off and then start the engine to complete the reset process.
Check the TPMS Light
- Drive the vehicle for a short distance (approximately 10-15 minutes) to ensure the TPMS light remains off.
- If the light stays off, the reset was successful.