how to reset the tire pressure light on a Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

417 words

Problem Statement

Learn how to reset the tire pressure light on a 2021 Ford F-150. Step-by-step instructions for diagnosing and fixing TPMS issues effectively.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface before performing any tire pressure checks.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inconsistent tire pressure readings on the display
•Possible fluctuation in ride comfort or handling
•Tire pressure may be below recommended levels

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the manufacturer’s recommended pressure.
2
Inspect all tires for visible damage or leaks.
3
Use an OBD-II scanner to check for any error codes related to the TPMS.
4
Ensure that the vehicle is parked on a level surface and the ignition is in the 'On' position without starting the engine.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner (optional)

Parts Required

•None necessary for reset; however, consider TPMS sensors if damaged.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the manufacturer’s recommended pressure.
2
Inspect all tires for visible damage or leaks.
3
Use an OBD-II scanner to check for any error codes related to the TPMS.
4
Ensure that the vehicle is parked on a level surface and the ignition is in the 'On' position without starting the engine.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, OBD-II scanner (if needed).
Ensure all tires are at the correct pressure as per the placard located on the driver’s side door jamb.

2. Resetting the TPMS

Turn on the Ignition:
- Insert the key and turn it to the "On" position without starting the engine.
Locate the TPMS Reset Button:
- This button is typically found beneath the steering column or to the right of the steering wheel.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
Start the Vehicle:
- Turn off the ignition and then start the engine. The TPMS light should go out after a few moments if the system has been reset successfully.

3. Drive the Vehicle

Drive the vehicle for approximately 10 minutes at speeds over 25 mph to allow the TPMS to recalibrate.