how to reset the oil change light on my Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

346 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 (2021-present) with this quick and easy guide. Step-by-step instructions included.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in Park (or Neutral) and the parking brake is engaged before starting the procedure.

Symptoms

•Oil change light remains illuminated on the dashboard
•Notification message indicating oil change is due
•Engine oil replacement has already been performed

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the gas pedal three times within ten seconds.
3
Turn the ignition off and then turn it back on to check if the oil change light is reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically, but an OBD-II scanner can be used for additional diagnostics if needed.

Parts Required

•No replacement parts required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools (if required, such as an OBD-II scanner, though not always necessary).

2. Access the Ignition

Sit in the driver’s seat and ensure all doors are closed.
Insert the key into the ignition or ensure the key fob is within the vehicle.

3. Reset the Oil Change Light

Turn the ignition to the "On" position (do not start the engine).
Quickly press the gas pedal three times within ten seconds.
Turn the ignition off completely.
Turn the ignition back to the "On" position to verify if the light has been reset.

4. Confirmation

Start the engine to confirm that the oil change light is no longer illuminated.