FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on Ford F-150 Fourteenth Generation (2021-present) - Ford F-150
Home/Cars/Ford/F-150/Fourteenth Generation (2021-present)/how to reset the oil change light on Ford F-150 Fourteenth Generation (2021-present)

how to reset the oil change light on Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
366 words

Problem Statement

Learn how to reset the oil change light on Ford F-150 (2021-present) with this easy step-by-step guide. Ensure your maintenance reminder is cleared.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position and not in motion during the reset process.

Symptoms

  • •Oil change light illuminated on the dashboard
  • •Message indicating oil change is due
  • •Oil life percentage showing low or at 0%

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this reset procedure.

Parts Required

  • •None required for this reset procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a level surface and in "Park" mode.
2. Resetting the Oil Change Light
  1. Turn Off the Vehicle: Ensure the engine is off before starting the reset process.
  2. Press the Brake Pedal: Firmly press and hold the brake pedal throughout the reset procedure.
  3. Ignition Position: Turn the ignition key to the ON position without starting the engine. This is the position just before the engine starts.
  4. Accelerator Pedal Action:
    • While keeping the brake pedal pressed, quickly press the accelerator pedal three times within a span of 10 seconds.
  5. Turn Off Ignition: Release the brake pedal and turn the ignition back to the OFF position.
  6. Verification: Start the engine to ensure the oil change light has been reset.