how to reset the oil change light on Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the oil change light on your 2021-present Ford F-150. Step-by-step guide to ensure your maintenance light is off after an oil change.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing this reset.

Symptoms

•Oil change light remains illuminated after the oil change
•Dashboard warning indicating maintenance is required
•Notification for oil life percentage showing 0% or similar

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the odometer button on the instrument cluster.
3
Navigate to the 'Settings' menu using the vehicle's infotainment system or the steering wheel controls.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle owner's manual

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: Vehicle owner's manual for reference (if needed).
Ensure the vehicle is parked on a level surface with the engine turned off but in the "On" position.

2. Access the Oil Change Reset Function

With the ignition in the "On" position (engine off), press the odometer button until the odometer display shows "Trip A."
Turn on the ignition without starting the engine by pressing the start button twice (or turning the key to the "On" position).
Press and hold the odometer button for approximately 5 seconds.

3. Confirm Reset

Release the odometer button after 5 seconds.
The oil change light should flash and then turn off, confirming that the reset was successful.