how to reset the oil change light on Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

342 words

Problem Statement

Learn how to reset the oil change light on Ford F-150 (2021-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the parking brake is engaged before starting the reset process.

Symptoms

•Oil change light illuminated on the dashboard
•Message indicating 'Oil Change Required' displayed
•Engine oil level is adequate after service

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition but do not start the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition to the 'On' position without starting the engine.
5
Observe the oil change light; it should blink and then turn off, indicating the reset was successful.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition but do not start the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition to the 'On' position without starting the engine.
5
Observe the oil change light; it should blink and then turn off, indicating the reset was successful.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: none required for this procedure.

2. Reset Oil Change Light

Turn Off the Vehicle
- Ensure the vehicle is completely turned off.
Key Positioning
- Insert the key into the ignition but do not start the vehicle.
Pedal Sequence
- Press the gas pedal three times within 10 seconds.
Ignition On
- Turn the ignition to the "On" position (do not start the engine).
Observe the Light
- Watch the oil change light; it should blink and turn off after a moment.

3. Verify the Reset

Turn the ignition off and then start the engine to ensure the oil change light remains off.